Maintenance
English
51
Door diaphragm
A
1.
Open the door, and then empty the
drum.
2.
Combine 3/4 cups of liquid chlorine
bleach and 1 gallon of warm tap water.
3.
Turn over the diaphragm (
A
).
4.
Wearing rubber gloves, use a soft, clean
cloth dipped in the water and bleach
solution to clean the diaphragm.
5.
Let stand 5 minutes, and then wipe up
and dry well.
6.
Put the diaphragm back into position.
CAUTION
Use bleach carefully and be sure to follow the bleach manufacturer’s use and care
instructions.
Recovery from freezing
The washer may freeze when the temperature in its location drops below 32 °F (0 °C).
1.
Turn off the washer, and unplug the power cord.
2.
Pour warm water over the faucet to loosen the water hose.
3.
Disconnect the water hose, and soak it in warm water.
4.
Pour warm water into the drum and leave it for about 10 minutes.
5.
Reconnect the water hose to the faucet.
NOTE
If the washer still doesn’t operate normally, repeat the steps above until it operates
normally.
WF6300N_DC68-03665J-00_EN.indd 51
2017-12-06 5:17:07
Summary of Contents for WF45N6300A Series
Page 1: ...Washer User manual WF45N6300A WF6300N_DC68 03665J 00_EN indd 1 2017 12 06 5 16 46...
Page 55: ...Memo WF6300N_DC68 03665J 00_EN indd 69 2017 12 06 5 17 21...
Page 56: ...Memo WF6300N_DC68 03665J 00_EN indd 70 2017 12 06 5 17 21...
Page 57: ...Memo WF6300N_DC68 03665J 00_EN indd 71 2017 12 06 5 17 21...
