English
25
Installation
STEP 3
Adjust the leveling feet
1.
Gently slide the washer into position.
Excessive force may damage the
leveling feet.
2.
Using a wrench, turn the leveling feet
clockwise or counterclockwise to adjust
the height until the washer is level.
3.
Using a flathead screwdriver, tighten
the
locking nuts (A)
.
NOTE
Use the open-end of the supplied wrench
to adjust the leveling feet.
STEP 4
Connect the water hose
B
A
CAUTION
•
Make sure to use new water hoses and
that
rubber gaskets (B)
are inside the
couplings (A)
at both ends of the hoses.
Water hoses without the gaskets may
leak.
•
Allow 5 in. (127 mm) of space between
the back of the washer and the wall to
prevent water hoses from being kinked.
Kinked hoses may cause water leaks.
•
If there is a water leak, stop using the
washer and contact a local Samsung
service center. A water leak may cause
electric shock.
•
Do not stretch the water hoses by force.
If a hose is too short, replace the hose
with a longer hose.
Untitled-4 25
Untitled-4 25
2022-12-20 4:13:24
2022-12-20 4:13:24
Summary of Contents for WF45R6300AU
Page 1: ...Washer User manual WF45R6300A Untitled 4 1 Untitled 4 1 2022 12 20 4 13 07 2022 12 20 4 13 07...
Page 65: ...Memo Untitled 4 65 Untitled 4 65 2022 12 20 4 13 39 2022 12 20 4 13 39...
Page 66: ...Memo Untitled 4 66 Untitled 4 66 2022 12 20 4 13 39 2022 12 20 4 13 39...
Page 67: ...Memo Untitled 4 67 Untitled 4 67 2022 12 20 4 13 39 2022 12 20 4 13 39...