English - 31
04
CLEANING
Cleaning your washing machine
Keeping your washing machine clean improves its performance, reduces the need for unnecessary repairs, and
lengthens its life.
CAUTION
: Never use the Eco Drum Clean cycle when laundry is in the washing machine. This may
result in damage to the laundry or a problem with the washing machine.
Eco Drum Clean
This cycle is a self-cleaning cycle that removes mold or dirt that may accumulate inside the drum.
Cleaning procedures
1.
Press the
Power
button to turn the power on.
2.
Turn the Cycle Selector to select Eco Drum Clean cycle.
•
You can only use the Delay End function with the Eco
Drum Clean cycle.
•
During the Eco Drum Clean cycle, the water
temperature is set to 70 ˚C.
You cannot change the water temperature.
3.
Press the
Start/Pause
button to start the Eco Drum Clean cycle.
Do not use any cleaning agents for cleaning the drum. Chemical residue in the drum deteriorates the
washing performance.
Eco Drum Clean auto alarm function
After a wash, if it is detected that cleaning the drum is required, the “Eco
Drum Clean ” indicator on the display and the corresponding lamp
on the Cycle Selector light up. In this case, remove the laundry from the
washing machine, turn the power on, and clean the drum by performing
the Eco Drum Clean cycle.
If you do not perform the Eco Drum Clean cycle, the Eco Drum Clean
indicator on the display and the corresponding lamp on the Cycle Selector
are turned off. They will be turned on again after two washes are performed.
Note that this does not indicate that there is a problem with the washing
machine.
Although the Eco Drum Clean auto alarm function usually operates once
a month, the frequency may differ depending on how often the washing
machine is used.
If the alarm occurs, clean the debris filter as well (refer to the "
" section on page
). Failure to do so may decrease the performance of the Eco Bubble function.
Untitled-1 31
2016-11-17 2:59:21
