English - 33
04
CLEANING
Cleaning the debris filter
We recommend cleaning the debris filter at least 5 or 6 times a year, or when the "
5E
" error code is displayed. If
foreign substances accumulate at the debris filter, the performance of the Eco Bubble function will be reduced.
CAUTION
: Before cleaning the debris filter, make sure to unplug the washing machine from the electrical
outlet.
CAUTION
: Do not disassemble the debris filter while the machine is running as hot water may flow out.
1.
Gently press the top area of the
filter cover
to open.
2.
Remove the remaining water (refer to the "
" section on page
.)
If you separate the debris filter without draining the remaining
water, the remaining water may trickle out.
3.
Unscrew the
debris filter cap (A)
by turning it to the left.
A
4.
Wash any dirt or other material from the debris filter. Make sure the
drain pump propeller behind the debris filter is not blocked.
5.
Replace the debris filter.
6.
Close the filter cover.
Make sure to replace the debris filter after cleaning it. If the debris
filter is not reinserted into the machine, your washing machine may
malfunction or water may leak.
Tighten the debris filter firmly after cleaning it. Failing to do so may
result in a malfunction or water leak.
Cleaning the exterior
1.
Wipe the washing machine surfaces, including the control panel, with a soft cloth using a nonabrasive
household detergent.
2.
Use a soft cloth to dry the surfaces.
CAUTION
: Do not pour water onto the washing machine.
Untitled-1 33
2016-11-17 2:59:22
