- English 6 -
- English 7 -
•
When you grab the TV to install, remove, adjust the horizontal level, or tilt the wall mount, do not apply direct
force on the display.
•
When you handle the TV to install, remove, adjust the horizontal level, or tilt the wall mount, be careful not to
damage any cables.
•
Be sure that the TV and wall mount stand are not hit with excessive force after installing the wall mount. The wall
mount or TV may be damaged or the TV connection with the wall mount device may become unstable. In this case,
reinstall the wall mount or consult an expert for assistance.
•
Check the product model as well as the enclosed user manual for each product and check that the wall allows
mounting.
–
Be sure the wall is stable. If the wall is weak, reinforce it before installation.
–
If the wall is not cement, check with a specialist to determine whether the TV may be installed on it.
–
Consult an expert installer if you do not have any background knowledge about the wall you want to install the
product on.
•
To maintain product performance and prevent malfunctions, do not install in the following locations.
–
Places where there is a risk of vibration or shock: The product may fall and be damaged.
–
Next to a sprinkler sensor: The sensor may detect the heat from the TV and sprinklers may start.
–
Near high-pressure cables: The TV may get interfered by high-pressure cable and the screen may not display
correctly.
–
Near heaters: The TV may become overheated and malfunction.
–
Do not install anywhere other than a vertical wall.
–
Install it out of the reach of children.
–
Do not penetrate the wall to install inside.
–
Be sure to check the type and condition of the wall you
will install on.
–
Materials to be used may differ depending on wall type.
Choose materials based on the specifications below.
–
You do not need to use all the supplied screws. However,
you must use at least 4 screws.
–
You must use screws in the two locations marked as A.
–
Choose at least 2 of the parts marked B to assemble
depending on surroundings.
–
To hide the cables inside the wall, contact an expert
installer.
