English - 10
Plug & Play Feature
When the television is initially powered on, several basic
customer settings proceed automatically and subsequently.
The following settings are available.
☛
If you accidentally select the wrong country for your TV, the
characters on the screen may be wrongly displayed.
☛
Any functions related to Digital TV (DVB) will only work in
countries or areas where DVB-T (MPEG2) digital terrestrial
signals are broadcasted. Please confirm with your local
dealer if you can receive DVB-T signals. Although this TV set
follows the DVB-T specification, maintaining compatibility with
the future coming DVB-T digital terrestrial broadcasts is not
guaranteed. Several functions may not be available in some
countries.
1
If the television is in standby mode, press the
POWER
button
on the remote control. The message
Start Plug & Play
is
displayed. Press the
ENTER
button.
The
Language
menu will automatically appear after several
seconds.
Select the appropriate language by pressing the ▲ or ▼
button.
Press the
ENTER
button. The message
Select ‘Home Use’
when installing this TV in your home.
is displayed.
4
Press the ◄ or ► button to select
Store Demo
or
Home Use
,
then press the
ENTER
button. The message to check the
connected status of the antenna is displayed.
➢
The default selection is
Home Use
.
➢
We recommend setting the TV to
Home Use
mode for the
best picture in your home environment.
➢
Store Demo
mode is only intended for use in retail
environments.
➢
If the unit is accidentally set to
Store Demo
mode and you
want to return to
Home Use
(Standard): Press the Volume
button. When the volume OSD is displayed, press and
hold the
MENU
button for 5 seconds.
5
Make sure that the antenna is connected to the TV.
Press the
ENTER
button. The
Country
menu is displayed.
Select your country or area by pressing the ▲ or ▼ button.
Press the
ENTER
button.
The message
Some DTV functions may not be available.
Digital Scan?
is displayed.
➢
This function is supported for all countries except
for the following countries: France, Germany, Italy,
Netherlands, Spain, Switzerland, United Kingdom,
Austria.
If your country supports the DTV functions, the message is
not displayed. Then you can follow the instructions from step
1
. When the local service provider does not support DTV
broadcasting but you choose a DTV supporting country, it
enters the DTV Plug & Play but DTV functions may not work
properly.When
No
is selected, follow the instructions from step
to
10
. When
Yes
is selected, follow the instructions from
step
11
.
Continued...
Plug & Play
Start Plug & Play.
OK
Enter
Plug & Play
Language
Move
Enter
English
Deutsch
Français
Italiano
▼
Plug & Play
Select ‘Home Use’
when installing this TV in your home.
Move
Enter
Store Demo
Home Use
Plug & Play
Check antenna input.
Enter
OK
Plug & Play
Some DTV functions may not be available.
Digital Scan?
Move
Enter
Skip
Yes
No
Plug & Play
P 1 C --
40 MHz
0 %
Enter
Skip
Start
Plug & Play
Country
▲
United Kingdom
Austria
Eastern Europe
Others
Move
Enter
BN68-01416B-Eng.indb 10
2008-2-29 17:22:27
