Operations
English
44
Special features
Smart Control (applicable models only)
You can connect to the SmartThings app and control your washing machine remotely.
Connecting your washing machine
1.
Download and open the SmartThings app on your smartphone or tablet (Android & iOS).
2.
Tap
Power
to turn on the washing machine.
3.
Tap and hold
Smart Control
.
a.
The washing machine enters AP mode and connects to your smartphone or tablet.
b.
Tap
Smart Control
to authenticate your washing machine.
c.
Once the authentication process is complete, your washing machine is successfully connected to the
app.
-
You can use various features available in the SmartThings app.
NOTE
• If your washing machine fails to connect with the SmartThings app, try again.
• Check your router if you experience any Internet connection problem after connecting your washing
machine with the SmartThings app.
• If the Wi-Fi is off, tap and hold
Temp.
and
Smart Control
simultaneously for 3 seconds to turn it on.
• Turning the washing machine's Wi-Fi on allows you connect to the washing machine via SmartThings
app on your smartphone or tablet, regardless of the power status of the washing machine. However, the
washing machine appears offline on the SmartThings app if the washing machine's Wi-Fi is off.
• Close the door before starting the Smart Control function.
• If you use your washing machine for a while without connecting it to the SmartThings app, a pop-up
message about Smart Control will show for 3 seconds.
• If the washing machine's Wi-Fi is not connected to an AP (access point), the Wi-Fi will turn off when you
turn of the power.
Stay Connect
Set up the Stay Connect function in your SmartThings app to keep Smart Control turned on at the end of a
cycle. Your washing machine stays connected to the app so you can send additional instructions, whether
you are at home or away.
1.
If you turn on the Stay Connect function on the SmartThings app, the washing machine will stay in
standby power saving mode after completing a cycle.
-
The Stay Connect function will remain active for up to 24 Hours if the door remains closed.
2.
When the Stay Connect function is active, the Smart Control, Door Lock, and Wi-Fi icons are illuminated
on your washing machine display.
3.
You can conveniently control your washing machine, adding rinse, spin or dry cycles using the
SmartThings app.
Untitled-4 44
2024-01-09 5:58:13
