Installation
English
22
Installation
3.
Open the water tap and check if there
are any leaks around the connection
areas. If there are water leaks, repeat
the steps above.
WARNING
If there is a water leak, stop operating the washing machine and disconnect from the
electrical supply. Then, contact a local Samsung service centre in case of a leak from
the water hose, or contact a plumbing technician in case of a leak from the water tap.
Otherwise, this may cause electric shock.
CAUTION
Do not stretch the water hose by force. If the hose is too short, replace the hose with a
longer, high-pressure hose.
Connecting to a non-threaded water tap
A
B
1.
Remove the
adaptor (A)
from the water
hose (B)
.
2.
Use a Phillips screwdriver to loosen
four screws on the adaptor.
Untitled-2 22
6/27/2019 5:07:52 PM