English
33
Operations
Control panel
01
02
03
04
05
06
07
08
09
10
11
01
02
03
04
05
06
07
08
09
10
11
01
Cycle Selector
Turn the dial to select a cycle.
02
Display
The display shows current cycle information and estimated time
remaining, or an information code when a problem occurs.
03
Temp.
Press to change the water temperature for the current cycle.
04
Rinse
Press to change the rinse count for the current cycle. You can set
the rinse count to a max of 5, depending on the cycle.
05
Spin
Press to change the spinning speed for the current cycle.
•
Rinse Hold
: The final rinse process is suspended so that
the laundry remains in the water. To unload the laundry, run a
drain or spin process.
•
No Spin
: The drum does not rotate after the final drain
process.
•
Spin Only
: To run the Spin Only cycle, press
Spin
for 3
seconds. When the cycle time and spinning speed appear, press
Spin
repeatedly until a desired spinning speed is selected. Then,
press
Start/Pause
to start the cycle. The spinning time depends
on the selected cycle.
Operations
Untitled-2 33
6/27/2019 5:08:03 PM
