22 English
Ins
tallation
Installation
STEP 5
Position the drain hose
The drain hose can be positioned in three ways:
A
Over the edge of a wash basin
The drain hose must be placed at a height
of between 60 cm and 90 cm (*) from the
floor. To keep the spout of the drain hose
bent, use the supplied
plastic hose guide (A)
.
Secure the guide to the wall using a hook to
ensure stable drainage.
ln a sink drain pipe
The drain pipe must be above the sink
siphon so that the end of the hose is at least
60 cm above the floor.
ln a drain pipe
The drain pipe should be between 60 cm
and 90 cm high (*). It is advisable to use
a 65 cm high vertical pipe. Make sure the
drain hose is connected to the stand pipe at
a slant.
Drain standpipe requirements:
•
Minimum diameter of 5 cm
•
Minimum carry-away capacity of
60 litres per minute
STEP 6
Power on
Plug the power cord into a wall socket featuring an AC 220-240 V / 50 Hz approved electrical
outlet protected by a fuse or circuit breaker. Then, press
Power
to turn on the washing
machine.
WW3000J-03581J-01 (SEPM)_EN (U.K)_150424.indd 22
2015-04-24 7:47:38
