English 23
Be
for
e y
ou s
tar
t
Before you start
Initial settings
Run Calibration (recommended)
Calibration ensures accurate weight
detection by the washing machine. Make
sure the drum is empty before running
Calibration.
1.
Power off, and then power on the
washing machine.
2.
Hold down
Temp.
and
Delay End
simultaneously for 3 seconds to enter
Calibration mode. The “
CB
” message
appears.
3.
Press
Start/Pause
to run the
Calibration cycle.
4.
The drum will rotate clockwise
and counter-clockwise for about 3
minutes.
5.
When the cycle is complete, “
0
” appears
on the display and the washing machine
will turn off automatically.
6.
The washing machine is now ready for
use.
WW85J5410IW_03504A-03_EN(Add WW75J5210IW).indd 23
2017/8/2 9:28:27