4. Alignment and Troubleshooting
4.1.8. Tech mode (SVC mode)
In service (tech) mode, the technician can check the machine and perform various test to isolate the cause of a malfunction.
a) Entering Tech mode
•
For M2070F / M2070FW,
1) Press
“Menu > # > 1 > 9 > 3 > 4”
on the control panel continuously.
2) Press
Menu
.
3) Select “
Tech Mode
”.
•
For M2070W / M2070,
1) Press
“Menu > Back > Left arrow > Right arrow > OK > Stop”
on the control panel continuously.
2) Press
Menu
.
3) Select “
Tech Mode
”.
b) Tech mode menu
NOTE
Some menu may not be available depending on model.
Depth 1
Depth 2
Depth 3
Depth 4
Send Level
[9-15]
12
DTMF Level
High [0-15]
Low [0-15]
Pause Time
[1-9]
Tone
Dial Mode
Pulse
33.6
28.8
14.4
12.0
9.6
Modem Speed
4.8
10%
Error Rate
5%
Clear All Mem.
TonerLow Level
[1-30]%
ADF Scan
Platen Scan
Fuser
TransferRoller
Pickup Roller
ADF Roller
Clear Counts
Enter Passcode [????]
ADF Rubber Pad
Data Setup
4-20
Copyright© 1995-2013 SAMSUNG. All rights reserved.