Downloading/Uploading files
3
Connecting the USB cable
➤
Before connecting yepp to PC, make sure to install USB driver.
2
Plug one end of the USB cable into the USB
port on the back of the PC.
Connect the opposite end of the USB cable to the
USB cable port on the bottom of the yepp.
●
If you disconnect the USB cable from your PC while implementing a
command or initializing during USB driver installation, your PC may
not function correctly.
●
Turn on the yepp.
2
Upon installation of the USB driver
"SAMSUNG YP-780"
will appear in the
[System Properties]
→
[Device Manager]
.
4
1
Connect the yepp to your PC and turn it on.
1
Open Windows Explorer on PC.
2
Select the file to save and drag-and-drop it into the removable disk icon.
(In numerical, alphabetical order)
3
USB driver is installed with a message saying that
it is searching for a new device. You may not see
the display screen during installation.
Go to the device manager to check that installa-
tion has been successfully completed.
3
USB connect cable
N
N
o
o
t
t
e
e
:
:
●
Music File can be played only when it is downloaded in the MUSIC folder or
the folder right below of MUSIC folder.
●
The order of music files is not relative to the replay order when you select a
Removable Disk in Windows Explorer.
●
While either DOWNLOAD or UPLOAD on the LCD of yepp is turned on, do not
remove UBS cable. Your PC might malfunction.
If “READY” will be displayed on the LCD of yepp, it means that transmission is
completed. Then you can remove UBS cable.
