Installation
English
30
Installation
• If the test result displays “
CLg
or
Cg
” (the duct system is blocked), refer to the “
” section below, and
then take proper measures to correct any problems. If the test is suspended, it could
result in incorrect results. Follow the proper procedures when testing the dryer.
• Even if the test result is normal (“
End
or
0
”), the duct system could be blocked slightly.
Properly install all duct work according to the installation instructions in this manual.
Exhaust ducting guide
Ducting
1.
Make sure the dryer is installed properly so the air exhausts freely.
2.
Use 4-inch rigid metal ducts. Tape all joints including the dryer connection. Never use
lint-trapping screws.
3.
To facilitate the exhaust, keep the ducts as straight as possible.
Cleaning
Clean all old ducts before installing the dryer, and make sure the vent flap opens and
closes freely. We recommend that you to clean the exhaust system annually or on a
regular basis.
WARNING
• To prevent fire, do not use plastic, thin-foil, or non-metal flexible ducts of any kind.
• Do not use a poor exhaust system because it slows down the dryer’s performance.
• Do not use excessively long ducts that have multiple elbows.
• Do not use crushed or clogged venting or ducts.
Untitled-1 30
4/23/2019 3:06:25 PM
Summary of Contents for DVE50R5400 Series
Page 1: ...Dryer User manual DVE G 50R5400 DVE G 50R5200 Untitled 1 1 4 23 2019 3 06 19 PM...
Page 59: ...Memo Untitled 1 59 4 23 2019 3 06 33 PM...
Page 61: ...Secadora Manual del usuario DVE G 50R5400 DVE G 50R5200 Untitled 2 1 4 23 2019 3 09 01 PM...