POWE
R
INA
INHIBIT
RESE
T
OUT2(OUT
)
설정시간
설정시간
0
0
t
t
t
INA
T
POWER
OUT2
(OUT)
T
T:설정시간
IN
A
T
POWER
T:설정시간
OUT2
(OUT)
IN
A
T
POWER
T:설정시간
OUT2
(OUT)
OUT2
(OUT)
INA
T
POWER
T-c
c
T:설정시간
T
HOLD
Up
Display
Down
Up
Display
Down
Up
Display
Down
Up
Display
Down
POWER
INA
INHIBIT
RESET
OUT2(OUT)
0
설정시간
설정시간
0
POWER
INA
INHIBIT
RESET
OUT2(OUT)
설정시간
설정시간
0
0
POWER
INA
INHIBIT
RESET
OUT2(OUT)
설정시간
설정시간
0
0
2) In case of INA ON :
Power ON Start
Reset OFF Start
3)Contorl output poerate One-shot .
4) In case of too small time setting,
Contact out put make error of output by responds time
Please set minimum setting time is over 100ms or more
.
(FLK.2)
Flicker2 (Power Hold):In case of Self sustain output
1) Timer start while INA input is ON.
2) During INA ON status :
Power ON Start
Reset OFF Start
3) Control out self sustain operate
4) If reached preseted time values
Control output change(But,Initial Start
OUT2 control output is OFF)
5) In case of too small time setting,
Contact out put make error of output by responds time
Please set minimum setting time is over 100ms or more
(FLK.2)
Flicker2 (Power Hold): In case of One-shot output
1) Timer start while INA input is ON.
2) During INA ON status :
Power ON Start
Reset OFF Start
3) Control output will One-shot operation.
4)In case of set too small time
Contact out put make error of output by responds time ,
So please set Min setting time more 100ms .
(INT)
Interval(Power/Signal Reset)
1) ) Timer start while INA input is ON.
2) Reset operate while IINA is OFF.
3)During INA ON status :
Power ON Start
Reset OFF Start
4)If reached preseted time values it become Auto Reset.
5) Control output will ON while time processing
(INT1)
Interval 1(Power Reset)
1) Timer start while INA input is ON..
2 During INA ON status :
Power ON Start
Reset OFF Start
3) During timer process INA Input ignores.
4) If reached preset time values it become Auto Reset.
5) Control output will ON while time processing
(OFD)
Signal OFF Delay(Power Reset)
1) During INA ON status, control output sustain ON status.
(But, except when Power is OFF and Reset is ON )
2) If reached preset time values it become Auto Reset
t
t
t
a t-
a
t