SAMY
DVD Player
33
AUDIO OUT(Audio output). Press the directional key
to select „Audio Output” you require and then press [EN-
TER] key for confirmation. There are 3 kinds of modes
for your option: SPDIF/OFF, DPDIF/Resource Code and
SPDIF/PCM.
SPDIF/OFF: There is no signal output in the coaxial
or optical fiber output port.
SPDIF/Resource code: When the videodisk player
connects the power amplifier by way of the coaxial
or optical fiber port, please select this item. In the
time when you play the disk recorded by applying
Dolby digital, DTS or MPEG recording system, the
output of this unit by way of the coaxial or optical
fiber output port is the corresponding digital signals
(Resource code format); at this time, the connected
power amplifier must be possessed of the decoding
functions of Dolby Digital, DTS or MPEG.
SPDIF/PCM: When the videodisk player connects
the double track digital stereo amplifier, please select
this item; when you play the disk recorded by apply-
ing the Dolby Digital or MPEG, the coaxial or optical
fiber output port will be output in a manner of modu-
lating the PCM into two channel.
KEY(Tune)
Use directional keys (Up or Down) to move the slider for
the setup of tune.
IV. Video Setup
The setup structural chart is as follows:
BRIGHTNESS
Use directional key (Up or Down) key to move slider to
set up brightness for video output.
CONTRAST
Use directional key (Up or Down) key to move slider to
set up contrast for video output.
HUE (hue)
Use directional key (Up or Down) key to move slider to
set up hue for video output.
