9
Copyright ⓒ 2015 SAMYOUNG TECH.CO.,LTD
6.
Radio-2 can receive the call without any operation. On receiving a call, The LED lights up
solid green. The second LCD line shows the incoming individual/group call icon at the left
corner and also shows Radio-1 user alias or number.
7.
Release PTT key to listen.
8.
If there is no voice activity for a predefined period of time(Call Hang Time), the call ends.
5.3 Make a voice call on Analog channel
The call operation is same as on the digital channel but the called parties are all the users on the
channel rather than the preset contacts for the channel due to no signaling on the analog channel.
6. Features and Operations
6.1 Scanning channels
The Scan feature allows you to listen to communication activities on other channels so that you can
keep a close track of your team members. You can enable and disable the Scan feature, select and
view the Scan List via the following operations:
To enable the Scan feature, go to “Menu -> Scan -> Scan On/Off” and select “On”. To view
or select a scan list, go to “Menu -> Scan -> Scan List”.
In the Home screen user can press the programmed Scan key to turn scan on or off.
During scanning channel, The LED blinks red slowly and the scan icon is displayed on the first line
of LCD
6.2 Sending an emergency alarm
Press Emergency key to activate emergency alarm mode. The Emergency icon appears in LCD
When Emergency alarm acknowledgement is received, the Emergency tone sounds and the LCD
shows “SOS Sent”
If the radio doesn’t receive an Emergency alarm acknowledgement and after all retries have been
exhausted, a tone sounds and the LCD shows “SOS Fail”
The radio exits the Emergency Alarm mode and returns to the Home screen in the predefined
period by CPS
6.3 Sending a Quick text message
