Installation and Operation Manual
13
2-1 Mounting the Unit
The chart plotter is supplied with bracket and flush mounting kit. You can choose a method of
installation according to your preference.
2-1-1 Bracket Mounting
Select the position, considering weight of equipment, conveniences, etc before installing.
Display installing:
1 Gripping display, find both connecting
joints between display & installer.
2 Smoothly push in display into the both
connecting groove of installer.
3 Turn on both knobs.
Display separation
1 Switch off the device.
2 Turn off both knobs & separate display &
installer.
2-1-2 Flush Mounting
1 Find a location for flush mounting.
2 Drill a hole in the area of the cutout area
for the blade of jig saw.
3 insert and cut out the area on the panel
using the jig saw
4 Drill four holes for mounting studs.
5 Install the mounting studs on the chart
plotter and insert them into the mounting
hole.
6 Attach the chart plotter to the mounting
location by attaching the supplied
hardware to the mounting studs.
Note
Before drilling work, check if there is enough space
for device installation.
2 Getting Started
Installation and Operation Manual
14
2-2 Keys
ESC
–
Exit from menu and return to
previous menu or window. In chart
window, it places own ship at center.
PAGE
–
Show main windows and allow you to
setup displays as you like.
CURSOR
–
Moves the cursor on the
display screen. In sonar window,
you can review sonar history.
MENU
–
Access to setting menu - Show
available options of current window.
-,+
–
zoom in and zoom out to multiple chart
level
GOTO
- Start navigating to a destination
point such as a MOB waypoint,
waypoint.
POWER
–
Turns power on/off. Opens display
Brightness, Night mode and
background settings.
SD Card
–
Open the cover to install
SD card
SRM
–
If you push button long, SRM function
works. (Refer to 2-5)
WPT
–
Create a waypoint.
ENT
–
Select the desired option or to
confirm selection
-,+
–
zoom in and zoom out to multiple chart
level
AIS
–
AIS/Plotter mode conversion
