- 81 -
a) Press the [F4] key
b) Move the cursor to the file you want to transmit using up/down arrow keys and press
[ENT] key.
c) If the file contents appear on the screen it will be transmitted
* Press the [F8] key to stop transmitting
(5) Transmitting a Macro Command
* Follow the above (1) procedure then the next steps
a) Press the [F5] key
b) Move the cursor to the command you want to transmit using up/down arrow keys and
press [ENT] key.
c) If the command contents appear on the screen it will be transmitted
* Press the [F8] key to stop transmitting
7.8 [FEC] mode
(1) Connection to a station with Selective FEC mode
a) Press [F9] key to call sub-menu.
b) Move the cursor to [FEC] using up/down arrow keys and press the [ENT] key to display
the following screen.
c) Move the cursor to desired station using arrow keys and press [ENT] key to display the
following screen.
- 82 -
* Use the [CLR] key to return to the previous screen.
d) Move the cursor to the desired channel using arrow keys and press [ENT] key.
e) Then, the initial screen of [SFEC] mode displays as below. Call up the station with the
frequency of selected channel
* Press the [F8] key during the calling to return to the initial screen of Telex mode
f) When the station is connected, the cursor appear on the upper left of screen
(2) Connect a station with collective FEC mode
a) Press [F9] key to call sub-menu.
b) Move the cursor to [FEC] using up/down arrow keys and press the [ENT] key to display
the following screen.
