- 85 -
display the following screen.
c) Move the cursor to a desired station with the up/down arrow keys and press the [ENT]
key to display following screen.
d) Move the cursor to Station and press the [ENT] key.
e) Enter the name of a station and press the [ENT] key.
f) Move the cursor to ID and press the [ENT] key.
g) Enter an ID and press the [ENT] key.
h) Move the cursor to the Tx of the desired channel and press the [ENT] key.
i) Enter Transmission frequency and press the [ENT] key.
j) Move the cursor to the Rx of the desired channel and press the [ENT] key.
k) Enter the Reception frequency and press the [ENT] key.
l) Press the [CLR] key to return to sub-menu.
7.11 Printing out station and frequency
a) Press [F9] key to call sub-menu.
b) Move the cursor to Station Print with the up/down arrow keys and press the [ENT] key
to display the following screen.
- 86 -
c) Move the cursor to a desired station with the up/down arrow keys and press the [ENT]
key to print out the frequencies of the station.
d) Press [F5] key to print out the registered frequencies.
7.12 Registering Macro Command
a) Press [F9] key to call sub-menu.
b) Move the cursor to Macro Command with the up/down arrow keys and press the [ENT]
key to display the following screen.
c) Select Command number using up/down arrow key.
d) Edit Command using the keyboard and press [ENT] key.
7.13 Set up TELEX mode
(1) Selecting of System set
a) Press [F9] key to call sub-menu.
b) Move the cursor to the SET UP using up/down keys and press [ENT] key to display the
following screen.