11F., No.2, Sec. 4, Jhongyang Rd., Tucheng Dist., New Taipei City 236, Taiwan (R.O.C.)
Tel: 886-2-22694456
｜
Fax: 886-2-22694451
｜
service@unictron.com
21
www.etek.com.tw
©
U
n
ic
tr
on
T
ec
h
n
olo
gie
s C
or
p
.
A
ll
spe
cif
ic
at
io
n
s
su
bje
ct
to
c
h
an
g
e
w
ith
ou
t n
oti
ce
.
www.sanav.com
www.unictron.com
SETP 4: Set up RF Detection (Optional)
This command is for the bracelet with RF capability. Once the RF Detect function is turned on, the device can
communicate with the Home Unit. This command can be used for site survey when installing Home Unit.
When RF test mode (the 2
nd
parameter) is turned on, the bracelet will beep when it receives the RF signal from
Home Unit. Sometimes we have to know the boundary of RF433 detection; therefore it’s an easier way to test
the communication between the two devices via the beep sound without observing the report in the server
especially at the first time of installation of the two units. After having tested it, we can turn the beep sound off.
There are two types of command, the short one is for toggling the function quickly and the long one is for setting
up all the parameter
Setup Format of short type
：
#<User Name>, <Password>, <Function Mode rf433>, <0/1 (Detection
On/OFF)>*
Example
：
#username,0000,rf433,1*
Setup Format of long type
：
#<User Name>, <Password>, <Function Mode rf433>, <0/1 (Detection On/OFF)>,
< Sound Enable/Disable>*
Example
：
#username,0000,rf433,1,0*
SMS Text
Description
#
Start sign.
username
Default ID of Bracelet.
If you have changed the Username, please use the updated one.
0000
Default password of Bracelet.
If you have changed the password, please use the updated one.
rf433
Function Mode of RF Detection
0/1
0: Disable RF detection in Bracelet
1: Enable RF detection in Bracelet. Bracelet will transmit information to the
Home Unit nearby which Bracelet is paired to. (default)
0/1
0: Turn off buzzer when receiving RF signals from Home Unit (default)
1: Turn on buzzer when receiving RF signals from Home Unit for RF range test
*
End sign.
Table: RF Detection Setup Format Description
Situation
Message Reply
Setup Succeeds
[username] + setup OK. Device RF433 setting is updated.
Table: RF Detection Setup Response Description
