Enable Vibration
Setup format:
#username,0000,vs,on*
Disable the vibration
Setup format:
#username,0000,vs,off,n*
Example:
#username,0000,vs,off,10*
Text Keyed In SMS Description
#
Start sign.
username
Default ID of CT-58A.
If you have changed the Username, please use the
updated one.
0000
Default password.
If you have changed the password, please use the updated
one.
vs
Mode ‘vs’ means vibration setup mode
on
To enable the vibration.
*
End sign.
Text Keyed In SMS Description
#
Start sign.
username
Default ID of CT-58A.
If you have changed the Username, please use the
updated one.
0000
Default password.
If you have changed the password, please use the updated
one.
vs
Mode ‘vs’ means vibration setup mode
off
Disable the vibration.
10
Device vibration detecting time. Unit 10 seconds. Please refer
to the
Note
below.
*
End sign.
Note:
When the vibration function is switched off, you can still define a period of time to detect the
vibration of the vehicle even though this function is off. When a 10 seconds is defined in the
“off” mode and vibration sensor detects the vibration exceeds 10 seconds constantly, CT-58A
will report to the terminal to alert users that the vehicle is being moved and the interval is 60
seconds and total is 3 times.
