San Telequip (P) Ltd.,
504 & 505,Deron heights,Opp Mahabaleshwar hotel
Baner Road,Baner Pune 411 045
Phone : 020-, 65001587
Connecting. Converting. Leading !
email :
info@santelequip.com
.
34
7 PROCEDURE TO CONFIGURE BACnet Router GW BMS 02-02R
1. Connect the GWBMS02-02R to the network using straight patch chord. The PC and
gateway should be on same subnet.
2. Open a web browser on PC and put IP address of BACnet router.
e.g. If gateway IP address is 192.168.1.200, put this IP into browser. (PC IP should be
192.168.1. X). Web page settings will open as shown in below snapshot.
3. To change the IP addresses of router go to Network Setting Option. Put new IP and press
System restart.
4. To set the BACnet MSTP-1 Port baud rate, make changes in ‘BACnet MSTP R2’
Setting.
5. To set the BACnet MSTP-2 Port baud rate, make changes in ‘BACnet MSTP
R1’ Setting.
6. After all configuration changes, press system restart.