San Telequip (P) Ltd.,
504/505 Deron Heights, Baner Road, Baner
Pune 411045, Mah, India
Phone: +91-20-27293455,9764027070,8390069393 Connecting. Converting. Leading!
email:
---------------------------------------------------------------------------------------------------------------------------------------
17
3.3 Network Configuration
Click on the “
Network
” link to open network settings.
LAN Settings,
when the Redundancy function is enabled, LAN1 and LAN2 will use the same IP
address for redundancy, and LAN2 Settings will be disabled. When the Dual Subnet function is
enabled, LAN1and LAN2 can be in different subnets. Fill in LAN settings accordingly.
Alternatively, you may activate DHCP (Dynamic Host Configuration Protocol) client function by
checking on “
Obtain an IP automatically
” field to obtain IP address, gateway and subnet mask,
and DNS from a DHCP server automatically. In addition, You can fill in the time setting for ARP
announce.
Figure 7
DNS Settings
Fill in DNS (Domain Name System) information in order to have an external DNS
server resolve domain name into IP address. This is crucial if the NTP and SMTP services use
domain names instead of IP addresses. A DNS server will be retrieved from the DHCP server
automatically if DHCP is enabled.
Figure 8
SNMP Settings,
The SNMP function is disabled by default. To enable this function check on