San Telequip Private Limited.,
504/505 Deron Heights, Baner Road, Baner
Pune 411045, Mah, India
Phone: +91-20-27293455,9764027070,8390069393 Connecting. Converting. Leading!
email:
_______________________________________________
Page 20 of 65,
Slave Interface
When a port is set to
slave mode, a Slave interface will be then created for you. Select the
Slave
Interface,
which is the
COM/VCOM/TCP port
; then select
Alias Mode
or
Offset Mode
to modify the
range and offset as you needed.
Alias Mode
maps a virtual ID to a real ID each at the time.
Alias ID
which refers to a Virtual ID for the reading Master node.
Real ID
which is the real ID from the slave node.
Offset Mode
which refers to a range of defined ID maps.
Slave ID Start
V
irtual ID’s start number.
Slave ID End
V
irtual ID’s end number.
Slave ID Offset
Real ID range, which is from (Slave ID Start
-
Offset) to (Slave ID End-Offset).
Fig. 3. 13
Note:
on VCOM, TCP and COM, Master and Slave IDs can be set, while on COM and VCOM work only with Serial ports.
