San Telequip (P) Ltd.,
504 & 505 Deron Heights, Baner Road
Pune 411045, India
Phone
: +91-20-27273455, 9764027070, 8390069393 Connecting. Converting. Leading!
:
info@santelequip.com
.
Serial Ports * 4
Port
: RS232/422/485 * 4 Port (RS-232 - RX/TX only)
Port
: RS422 / 485 (Surge Protect)
Speed
: 300 bps ~ 230.4Kbps
Parity
: None, Odd, Even, Mark, Space
Data Bit
: 5, 6, 7, 8
Stop Bit
: 1, 2
RS-232 Pins
: Rx, Tx, GND
RS-422
: Rx+, Rx-, Tx+, Tx- (Surge Protect)
RS-485
: Data+, Data- (Surge Protect)
15KV ESD for all signals
3000V DC Isolation (option)
Software
: TCP to RTU Slave, RTU Master to TCP Slave
TCP to ASCII Slave, ASCII Master to TCP Slave
Utility
: Built-in Web server Setup, Easy Operation
Watch Dog Function
Power
: DC 9~24V, 200mA@12V, support DC Jack & Terminal Input
Led Lamp
: SYS, PWR, Wi-Fi, RX, TX, LAN
Environment
: Operating Temperature: -20
⁰
C to 70
⁰
C
Storage Temperature : -25
⁰
C to 80
⁰
C
Dimensions
: 195 * 120 * 35 mm (W * D * H), W+16mm x2 for din rail extension.
Weight
: 660 gm
WARRANTY
: 1 year
Product Panel Views
Antenna Connector
The connector for antenna is a standard reverse SMA jack. Simply connect it to a 2.0dBi dipole
antenna (Standard Rubber Duck) and it is 50 Ohms impedance and can support 2.4GHz frequency.
Ethernet Port
The connector for network is the usual RJ45. Simply connect it to your network switch or Hub. When
the connection is made, the green color LED of Ethernet port will light on. When data traffic (Rx/Tx)
occurs on the network, yellow color LED will blink during data transferring.
Serial Port of RS232/RS422/RS485
Connect the serial data cable between the SC10E4M K Gateway and the Serial interface device.
Follow the web page parameter setup procedures to configure the Gateway.
DC-IN Power Outlet
The Serial to EtWi-Fi Gateway is powered by a single 12V DC (Inner positive, outer negative)
power supply and 1.0mA of current. Connect the power adaptor to the AC power socket and put the
DC Jack plug into the outlet of device. The “SYS” green color LED will be ON when power is properly
