San Telequip (P) Ltd.,
504,505 Deron Heights, Baner Road
Pune 411 045, India
Phone : +91-20-27293455, 9764027070, 8390069393 Connecting. Converting. Leading!
email :
13. Reset (if needed)
Upon the power is on, press “Reset” button until the SYS and WIFI LED flashing and then release button will
make SC10MK2 485 IOT 502 reset configuration back to factory default. Device will reboot to work.
DC Power outlet – DC 9-24V
RS-232 Pin Assignment
The pin assignment scheme for a 9-pin male connector on a DTE is given below.
PIN 1: DCD PIN 2: RXD PIN 3: TXD PIN 4: DTR
PIN 5: GND PIN 6: DSR
PIN 7: RTS PIN 8: CTS
PIN 9: X
RS232 Connection Details
SC10MK2 Side
COM Port Side
TX
RX
RX
TX
RTS
CTS
CTS
RTS
DSR
DTR
DTR
DSR