San Telequip (P) Ltd.,
504,505 Deron Heights, Baner Road
Pune 411 045, India
Phone : +91-20-27293455, 9764027070, 8390069393 Connecting. Converting. Leading!
email :
2.2.2
Address: It’s editable when “STATIC” is selected. Input IP address.
2.2.3
Netmask: It’s editable when “STATIC” is selected.
2.2.4
Gateway: It’s editable when “STATIC” is selected.
2.2.5
DNS
: It’s editable.
2.3 TCP KEEPALIVE: Time, Interval and Probes are editable.
2.3.1
Time
: It’s editable for idle time setting. The Probes will start after the idle time.
2.3.2
Intvl
: It’s editable for the interval time between every Probes.
2.3.3
Probes : It’s editable for number of Probes to find out whether TCP connection broken or not.
2.4 Up to now, setting is successfully configured and saved temporarily. Please go to “Save & Restart” to click
“YES” will be permanent configured and reboot this device to work. You may hold this action until all
configurations of every section are completed.
3. Serial
3.1 Baud rate
: 300 ~ 921600 bps selectable.
3.2 Parity
: NONE, ODD, EVEN, MARK, SPACE
3.3 Data Bits
: 5, 6, 7, 8,
3.4 Stop Bits
: 1,2
3.5 Flow Control : XON/XOFF, RTS/CTS, DTR/DSR, NONE
3.6 RxDelay(ms) : no function.
3.7 TxDelay(ms) : no function.