San Telequip (P) Ltd.,
504,505 Deron Heights, Baner Road
Pune 411 045, India
Phone : +91-20-27293455, 9764027070, 8390069393 Connecting. Converting. Leading!
email :
**Buzzer
Led Lamp : SYS, PWR, PoE(option), WiFi, RX, TX, LAN
RTC : Real Time Clock
Watch Dog Function
Software : TCP, Modbus TCP Master to Modbus RTU Slave
Product Panel Views
Antenna Connector
The connector for antenna is a standard reverse SMA jack. Simply connect it to a 2.0dBi dipole antenna
(Standard Rubber Duck) and it is 50 Ohms impedance and can support 2.4GHz frequency.
Ethernet Port
The connector for network is the usual RJ45. Simply connect it to your network switch or Hub. When the
connection is made, the green color LED of Ethernet port will light on. When data traffic (Rx/Tx) occurs on the
network, yellow color LED will blink during data transferring.
Serial Port of RS-232/RS-422/RS-485
Connect the serial data cable between the SC10MK2 converter and the Serial interface device. Follow the web
page parameter setup procedures to configure the converter.