San Telequip (P) Ltd.,
504, 505 Deron Heights, Baner Road
Pune 411 045, India
Phone: +91-20-27293455, 9764027070, 8390069393 Connecting. Converting. Leading!
email
---------------------------------------------------------------------------------------------------------------------------------------
Page
7
of
13
Note: Default Serial Parameters are:
•
Baud Rate = 115200
•
Parity = None
•
Stop Bits = 1
5.2 Device Configuration:
•
After completing docklight setting connect Power to your Device.
•
“System Started” message will print on your docklight window.
•
LED will Glow for 30 Sec. within this 30 Sec enter “UUU” in docklight window
through keyboard.
•
Start message will display on screen along with main menu.
SC15L
**************************************************
<CR>
* Product description: SC15L *
<CR>
* Firmware version : 1.00 *
<CR>
* Manufacturer : SAN Telequip Pvt. Ltd. *
<CR>
* website : www.santelequip.com *
<CR>
**************************************************
<CR>
Select Main Menu
<CR>
<CR>
1 - Mode of Work
<CR>
2 - System Settings
<CR>
3 - Serial Port
<CR>
E - Save & Exit
<CR>
<CR>
Enter <1-3/E>
<CR>
SC15L APS
**************************************************
<CR>
* Product description: SC15LAPS *
<CR>
* Firmware version : 1.00 *
<CR>
* Manufacturer : SAN Telequip Pvt. Ltd. *
<CR>
* Website : www.santelequip.com *
<CR>
**************************************************
<CR>
Select Main Menu
<CR>
<CR>
1 - Mode of Work
<CR>
2 - System Settings
<CR>
3 - Serial Port
<CR>
E - Save & Exit
<CR>
<CR>
Enter <1-3/E>
<CR>
