4/8-channel H.264 DVR User Manual
15
in the harddisk state, when you can click “HDD Format ” to format the harddisk. If the
system detects any available harddisk, the harddisk state will be “ONLINE”;
ALL/FREE
ALL/FREE
ALL/FREE
ALL/FREE::::
referring to the total storage capacity and current remaining storage
capacity of the harddisk;
TIME
TIME
TIME
TIME LEFT
LEFT
LEFT
LEFT
: referring to the time remaining for recording based on the currently set
picture “resolution” and “quality”;
FORMART:
FORMART:
FORMART:
FORMART:
Click the check box, a “√” will appear in this box, indicating that this HDD
has been selected.
OVERWRITE
OVERWRITE
OVERWRITE
OVERWRITE::::
ENABLE:The harddisk will overwrite the earliest record when its memory
is full; DISABLE: Recording will stop when the memory of the harddisk is full;
HDD
HDD
HDD
HDD FORMART
FORMART
FORMART
FORMART
: If the harddisk is used for the first time, it is often necessary to format
the harddisk. Click the “Format HDD” button, and then click “Enter” for formatting in the
pop-up prompt message dialog box, otherwise click “Cancel”. After clicking “Format
HDD”, the system will prompt “You will lose all data by formatting the harddisk. Will you
continue?” Then press “Enter”, and the system will prompt “Formatting…” and then
“Formatting Successfully”. The system will restart automatically;
USB
USB
USB
USB FORMART
FORMART
FORMART
FORMART::::
formatting the data in the U-disk.
The “Default” button is used to restore the factory default values.
Note: In order to connect the harddisk data on the DVR securely, we recommend that
the harddisk must be formatted before the first time of recording.
3.6
3.6
3.6
3.6 Basic
Basic
Basic
Basic setup
setup
setup
setup
Enter the Basic Setup screen from “Main Menu” →“Basic”, as shown below:
The Basic Setup screen includes the 6 options of System Language, Time Setup, User
Password, Display Setup, Video/Audio Setup and Exit.
3.6.1
3.6.1
3.6.1
3.6.1 System
System
System
System language
language
language
language
Move the cursor to the “LANGUAGE” option (the icon is enlarged and highlighted to
indicate selection), and press “Enter” to enter the setup screen of this option, as shown
below: