12
4.4 Remote Parking Start
#Username,0000,4*
Use this SMS message to remotely start the
Park
function.
#:
Start sign
ID:
Username
is the default ID of G-19.
Password:
Default Password is “
0000
”.
Parking Command:
You have to input “
4
” to start the
Park
function.
*:
End sign
When the start of Park function of G-19 is setup successfully, G-19 will reply a SMS message:
Username setup OK. G-19 parking.
But if fail, G-19 will reply a SMS message:
Username setup fail.
Due to Park function needs real-time GPS data calculation and comparison; once G-19
cannot get GPS fix, Park function will not be allowed. You will receive the SMS when you
sent a park SMS without GPS fix:
Username GPS Time To First Fix, parking not allowed.
When G-19 is in Emergency Mode, Park function is not allowed. Anyone want to start the
park function will be replied:
Username in emergency, parking not allowed.
You can also launch the parking function by pressing the “Park” button on G-19.
Be sure to built in the cellular phone number first for G-19 to send SMS messages. After
initializing the “parking” function, G-19 will lock the current parking space of your car. When 1)
your car is towed or stole away form 100m from the original place or 2) the speed per hour of
your car is over 1 nautical mile. G-19 will start sending “towed” SMS to the indicated phone
to alert the towed status and showed the GPRMC’s UTC time, latitude and longitude
information.
ID
Password
Parking Command
