8
Chapter 4 Setup SMS Messages
To setup your G-19, sending setup SMS message to your G-19 through its SIM card.
Following the description below. G-19 currently provides 4 Modes to setup its function. Key
the specific SMS messages in your cellular as the instructions, sending them to the phone
number that is supplied by your SIM card.
Note
Default
“ID”=Username
Default
“Password”=0000
Only when “Password” & ”Command” is correct, the G-19 will update information itself
according to user’s definition.
Make sure to tap ”#” sign at the start and “*” sign at the last line in your setup SMS
messages.
Please note that it has no space between the words and commas in the setup message.
The security “Pin Code” function of the SIM card must be off; otherwise, G-19 will not
access SIM card and get the GSM Network service.
Be sure to add the “Country Code” when you setup G-19’s phone numbers; G-19 can
accept the “+” sign (e.g. +49xxxxxxxxxx for German).