9
4.1 ID Setup
#Username,0000,1,GPS00001,GPS00001*
Use this SMS message to setup the ID of your G-19.
#:
Start sign
ID:
Username
is the default ID of G-19. It can be 8 digits at most. Input less than 8 digits will also be
accepted.
Password:
Default Password is “
0000
”.
ID Command:
You have to input “
1
” to setup ID.
New ID:
Tap the new ID you want to change.
Confirm ID:
G-19 will confirm your ID in case of error.
*:
End sign
When the ID of G-19 is setup successfully, G-19 will reply a SMS message:
GPS00001 setup OK. G-19 ID updated.
But if fail, G-19 will reply a SMS message:
Username setup fail.
When G-19 is in Emergency Mode, ID setup is not allowed. Anyone want to change the ID
will be replied:
Username in emergency, ID setup not allowed.
ID
Password
ID Command
New ID
Confirm ID