GS-818 GPS/GSM/GPRS Vehicle Tracker User Manual
29 Copyright © 2011 San Jose Technology, Inc. All Rights Reserved.
Set up Auto Report by Time
Generally, THE DEVICE will generate GPS (GPRMC) data and report to server, specified cellular phone or network routes.
Auto Report setup can enable the device report GPS data automatically during a period of time.
Use this command to set up the frequency of Auto Report. The device can report according time interval. If you send the
SMS command as the following example, the device will send a report every 5 minutes (300 seconds) and the total
number of reports is 99.
Note: You may limit the number of the Auto Reports by inputting the digits from 1 to 9998 in the
「
total number of reports
」
field. When you input 9999, the device will generate unlimited Auto Reports. When you input 0, the device will
stop/disable Auto Report.
Setup format:#
「
User Name
」
,
「
Password
」
,
「
Function Code
」
,
「
Intervals (sec.)
」
,
「
Total number of reports
」
*
Example1
：
#username,0000,6,300,99*
Table: Auto Report by Time Setup Format Description
Table: Auto Report by Time Setup Response Description
SMS Text
Description
#
Start sign.
username
Default user name of the device.
If you have changed the username, please use the updated one.
0000
Default password.
If you have changed the password, please use the updated one.
6
Mode 6 defines Auto Report setup mode.
300
Time Interval (period) of Auto Report.
99
Times (frequency) of Auto Reports that will be sent automatically.
*
End sign.
Situation
Response
Setup Succeeds
[username] + Setup OK.Device Auto Report setting is updated.
Setup Fail
[username] + Auto Report setting Setup Fail!
Incorrect password
[username] + Password setup Fail!
Incorrect username or
command format
[username] + command error
Emergency Mode
[username] + Username, in emergency, setup stop.
