GS-818 GPS/GSM/GPRS Vehicle Tracker User Manual
34 Copyright © 2011 San Jose Technology, Inc. All Rights Reserved.
Angle Report
Use this command to set up the vehicle tracking Angle Report. the device will report if the direction of the vehicle exceeds
the tracking angle threshold (turn right, left…). If you set up the command, the device will detect the direction of vehicle
as reference direction and compare the vehicle traveled angle with it and trigger the report if it exceeds. Every time after
the report is triggered with a period of delay time, the device will detect the direction, set it as new reference direction and
keep monitoring. Please note the points as the following:
Note1: The Angle Report comes with Auto Report. The Angle Report will also be disabled if the Auto Report is disabled or
the number of Auto Reports is sent.
Note2: After triggering the Angle Report, the Auto Report interval set by time or distance will be reset. For example, an
Auto Report is set to report every 60 seconds, now an Angle Report is triggered at the 38th second, so we expect to see
the next Auto Report happen after 22 seconds, but the next Auto Report will be triggered in more 60 seconds due to the
Angle Report is triggered.
For another example, an Auto Report is set to report every 100m after the vehicle traveled, now an Angle Report
is triggered after 68m traveled, so we expect to see the next Auto Report happen after 32m traveled, but the next Auto
Report will be triggered in more 100m due to the Angle Report is triggered.
Note3: The Auto Report and Angle Report will be suspended if SOS, Geo-fence and Move report is triggered.
Setup format:#
「
User Name
」
,
「
Password
」
,
「
Function Code
」
,
「
Angle (degree)
」
,
「
Speed (km)
」
,
「
Delay Time(Second)
」
,
*
Command: #username,0000,angle,30,15,5*
