GS-818 GPS/GSM/GPRS Vehicle Tracker User Manual
55 Copyright © 2011 San Jose Technology, Inc. All Rights Reserved.
Output Action Time Definition
Use this command to set up the action time of the device output detection.
Command format: #
「
username
」
,
「
Password
」
,
「
o1/ o2
」
,
「
2
」
,
「
Active time(seconds)
」
*
Command: #username,0000,o1,
2
,20*
Table: Output Action Time Setup Format Description
Table: Output Action Time Setup Response Description
SMS Text
Description
#
Start sign.
username
*Default user name of the device.
*If you have changed the username, please use the updated one.
0000
*Default password.
*If you have changed the password, please use the updated one.
o1
Mode “o1” defines o1 status setup mode. o1 to o2 setup are available
2
To define the operation of output sensor
20
Output sensor active time (seconds). The number can be defined from 1 to 9999 and 9999
means non-stop.
*
End sign.
Situation
Response
Success
username, Device I/O output-1 timer setting ok.
username, Device I/O output-2 timer setting ok.