14
4.1 Changing ID
You can change the ID of TRACKSTARIII by following the format below. No space is allowed in
between the characters. For example, if you send the SMS message shown in
E.g.1
to the
TRACKSTARIII, you will change the ID from “Username” to “GPS00001”.
E.g.1
#Username,0000,1,GPS00001,GPS00001*
The table 4.1.1 is describing the meaning of each segment in the message above.
Text Keyed In SMS
Description
# Start
sign.
Username
Default ID of TRACKSTARIII.
0000
Default
password.
If you have changed the password, please use the updated one.
1
Mode 1 is representing the ID setup
GPS00001
New ID defined by the owner.
At the maximum of 8 characters.
GPS00001
Confirm the new ID by keying it again. It must be exactly the same as the
new ID keyed previously.
* End
sign.
Table 4.1.1
The table 4.1.2 is showing each confirm message reply after setup.
Situation
Message Reply
Setup Succeeds
GPS00001 setup OK. TRACKSTARIII ID updated.
Setup Fail
Username setup fail.
Incorrect password
Username password error
TRACKSTARIII is in Emergency
Mode
Username in emergency, ID setup not allowed.
Table 4.1.2
Summary of Contents for TRACKSTARIII
Page 5: ...5 ...