9
When the safe door is opened,
internal lighting activates for 30
seconds.
If you need to activate your light
longer, you can press the green light
activation button on the inner door
panel. This will activate the internal
lighting for an additional 30 seconds
each time it is pressed.
9. INTERNAL LIGHTING
Internal
Light
Light Activation
Button
8. CLEARING ALL PROGRAMMED FINGERPRINTS
NOTE:
If 100 max fingerprints have already been programmed the indicator ring will flash
5 times and beep 5 times. We recommend clearing all programmed fingerprints
and starting the programming process over.
Hold the reset button for 5
seconds. After 5 seconds, the
indicator ring will flash green two
times and beep two times to
signal that all fingerprints have
now been cleared. The safe will
not open to any fingerprints until
a new fingerprint has been
programmed.
HOLD DOWN THE
RESET BUTTON
x
2
x
2
GREEN
LIGHT
