8
7. TROUBLESHOOTING
6. PROGRAMMING ADDITIONAL FINGERPRINTS (Continued)
Complete section 4 again for
each fingerprint zone you
would like to program.
NOTE:
If you experience any problems
reading your print, including
inconsistent readings, note the
area of your print that doesn’t
work properly, and specifically
reprogram that area.
This scanner will hold up to
100 different fingerprints.
In the event that you run into issues with programming and accessing your
safe, please read through this section for answers to your questions.
BEEP
BEEP
BEEP
HOLD FOR BEEP
LIFT FINGER
2 BEEPS + 2 GREEN FLASHES = SUCCESS!
Locked Out Of Your Safe
YOUR PROGRAMMED
FINGERPRINT IS NOT
READING AT ALL TIMES
SOLUTION
PROBLEM
Contact Customer Service at cs@sportsafieldsafes.com or (888) 792-4264
Placing a portion of a fingerprint on the scanner
that has not been programmed can result in an
error. We recommend programming multiple
areas of each fingerprint.
Make sure to hold down your finger on the
scanner instead of tapping. Scanner needs time
to complete the scanning process.
Fingerprints may lack definition due to excessive
skin dryness. We recommend applying
moisturizer or slide your fingerprint against your
forehead before scanning process.
GREEN LED
GREEN LED
THE SCANNER IS NOT
READING YOUR
FINGERPRINT
In the event you are locked out of your safe, use your backup keys to gain access and
follow the steps in Section 4: Electronic Lock Security Code Setup Instructions.
If you have lost your backup keys, or are still having difficulties, contact customer
service at the number below. Proof of purchase is required to obtain keys.
