9
7. GLASS SHELF INSTALLATION
Screw all provided shelving
brackets into place on both the
left and the right walls of the safe
using a Phillips head screwdriver.
Note: Do not over tighten.
2.
First, remove the protective
film from the acrylic mirror
back wall.
Then, remove the tempered
glass shelving from the
protective packaging located
at the bottom of the safe and
gather all provided
hardware.
1.
St
ep 1
St
ep 2
St
ep 3
Rotate the front shelving brackets
45 degrees on both sides of the
safe.
Note: The back brackets remain
straight.
3.