7
If programming is is successful: touch
pad will beep 2 times and green
unlock LED will flash 2 times.
If your code was not accepted: the
touch pad will beep three times and
the yellow lock LED will flash 3 times.
Press the reset button and start again.
St
ep 2
St
ep 1
1.
2.
On the inside of the safe door,
locate the brass cap. Unscrew and
remove the cap, giving access to the
reset button. Press the reset button.
You will hear 2 beeps and the touch pad
will illuminate indicating that you are
now in programming mode.
Enter your new 3 to 8 digit
security code followed by the
[ * ] symbol.
4. ELECTRONIC LOCK SECURITY CODE SETUP
Important: Your safe comes programmed with a factory code of [ 1 5 9 # ]. It is necessary
to re-program your safe with a new security code you have personally selected to provide
maximum household security. Be careful in choosing your new security code, you’ll want
to be sure that you can operate the unit quickly without making an error.
NEW 3-8 DIGIT SECURITY CODE
x2
x2
SUCCESS!
GREEN
Inactivity Timeout: If this programming sequence is not completed within 10
seconds the red LED will flash 3 times and the touch pad will shut down.
Return to step 1 to restart this process.
