9. LOCKOUT MODE/ TAMPER PROTECTION
10. CLEARING ALL PROGRAMMED FINGERPRINTS
10
x
2
x
2
GREEN
LIGHT
NOTE: If 100 max fingerprints have already been programmed
indicator ring will flash 5
times and beep 5 times. We recommend clearing all programmed fingerprints and starting the
programming process over.
Press and hold the reset button.
Initially, the indicator ring will
flash green and beep once.
Continue holding reset button
for 5 seconds, the indicator ring
will flash green two times and
beep two times.
11. SILENT ENTRY MODE
To initiate silent entry mode, hold a programmed
finger on the scanner for 5 seconds beyond your
fingerprint being accepted. The green indicator
ring will turn off and back on, but will not beep,
indicating you are now in silent entry mode.
You will not hear any sounds for any functions
while the vault is in silent entry mode.
To turn the sound back on, hold a programmed
finger on the scanner for 5 seconds beyond your
fingerprint being accepted. The green indicator
ring will turn off and back on and will beep once
indicating you are no longer in silent entry mode.
1. Three consecutive incorrect code entries will put
the vault in “Basic Lockout” mode. Scanner is
deactivated for 30 seconds.
2. After “Basic Lockout” mode has ended, another
three consecutive incorrect code entries will result
in “Severe Lockout” mode. Scanner is deactivated
for 5-minutes.
