7
6. OPENING VAULT WITH RECORDED FINGERPRINT
If your print is not accepted:
you will see 1 red light flash with 1
sound. This means the scanner did
not read your fingerprint (try again).
If you see 5 red flashes with 5 sounds,
the scanner read your fingerprint but
did not accept it. Follow section 6 to
reprogram your fingerprint.
x
1
x
1
RED
LIGHT
x
5
x
5
RED
LIGHT
SCANNER LIGHT
TRY AGAIN
REPROGRAM
With keys in hand, close the door.
Place and hold the PROGRAMMED
finger on the scanner, indicator ring
will illuminate green and vault door
will open.
7. PROGRAMMING ADDITIONAL FINGERPRINTS
INDIVIDUALLY MAPPING ALL
ZONES OF YOUR FINGERPRINT
WILL ENSURE A RELIABLE
READING BY THE SCANNER.
To ensure each programming
sequence is properly captured, it
needs to read the exact same place
on your finger four times in a row,
once successful you can move onto
the next zone of your fingerprint.
This counts as one programmed
fingerprint of 100 fingerprints this
unit can keep in memory.
Once programming sequence has
been successfully completed, you
can move onto the next zone of your
fingerprint.
TIP
RIGHT
TOP
MIDDLE
LEFT
When accessing your vault quickly, there is a chance you might press
the scanner with a part of your finger that you have not registered before.
For this reason, we recommend programming additional areas of your
fingerprint to ensure fast and reliable entry to your vault.
