11
Disconnect the wire harness clip from the stock air box.
Lift the stock air box up to unseat the prong and remove
the stock air box from the vehicle. Double check to make
sure the stock grommet is still in on the wheel arch hump.
SBFILTERS.COM
Twist to remove the engine oil cap and set the cap aside.
7
Locate the vacuum line attached to the engine cover that
is located on the passenger side towards the front of the
vehicle.
8a
Press the tab to disengage the connector from the barb,
then pull off. Remove the engine cover from the vehicle.
8b
10
Remove the two mounting nuts securing the stock air box
and set them aside. The mounting nuts will be reused in
Step 21.
Tool Required:
10mm Socket/Wrench
Reinstall the engine oil cap.
9
6