SBFILTERS.COM
19
18
20
21
22
Install the Tube Seal
(B)
onto the Air Box
(A)
.
Determine if you want to install the Box Plug
(R)
or leave
the secondary inlet open on the Air Box
(A)
. To install the
box plug, install the 1/4-20 Bolts
(N)
, Lock Washers
(O)
,
and Washers
(P)
from inside the air box.
Tool Required:
11mm Socket/Wrench
Installed the Air Box
(A)
into the truck. Ensure that the
threaded studs go through the Air Box Grommets
(M)
and
the prong on the air box goes into the stock grommet.
Reinstall the two mounting nuts removed in Step 10.
Adjust the position of the Air Box
(A)
so that the Fender
Seal
(R)
makes contact with the fender opening before
tightening.
Tool Required:
10mm Socket/Wrench
Insert the Intake Tube (Filter)
(L)
into the Air Box
(A)
. Rotate
the tube so that the Quick Connect
(F)
is horizontal as
possible.
23
Install the Step Coupler
(H)
onto the throttle body with
Hose Clamps #60 and #52
(G & I)
. The side with the
smaller diameter goes onto the throttle body. Tighten the
#52 Hose Clamp. Leave #60 Hose Clamp loose.
Tool Required:
8mm Socket/Wrench
#60
#52, Tighten
8
