• 8mm Wrench/Socket
• 1/4”, 5/16” Nut Driver or Flat Blade
Screwdriver
• T20 Torx
• Phillips Screwdriver
TOOLS REQUIRED:
• Cleanable (KF-1051). If the enclosed filter is Red, it came preoiled from the factory.
• Disposable (KF-1051D). If the enclosed filter is White, it is a disposable filter and should be discarded once it
reaches
capacity. This filter
does not require oil
.
S&B FILTER MAINTENANCE:
• Please read the entire product guide before proceeding.
• Ensure all components listed on pages 3 & 4 are present.
• If you are missing any of the components, call our customer support.
• Do not work on your vehicle while engine is hot.
• Make sure the engine is turned off and the vehicle is in Park or the Parking Brake is set.
BEFORE YOU START
Kit may not fit with the following Aftermarket
Parts installed:
• Body Lift or Lowering Kit
• Custom Hood
• Throttle Body Spacer/ Upgrade
NOTES:
Product will be submitted to Air Resources
Board for approval shortly.
Not Legal for use in CA or other states
adopting CA emissions standards”
See Page 2 for more info.
CARB STATUS - EXEMPT
for purchasing your new S&B Filters intake kit. If at any time you need additional assistance with installation or have any
other questions or comments, feel free to call our customer service department. You can also take advantage of our live chat
and connect with an S&B representative immediately. We hope you enjoy your new S&B Filters product and thank you for your continued
support. Breathe Easy. Your Engine and Warranty Are Protected.
Thank You!
2008-10
Ford
F-250/F-350
6.4L Powerstroke
APPROX. INSTALL TIME:
1HRS | 00MIN
YEAR:
MAKE:
MODEL:
ENGINE:
1
VEHICLE APPLICATION:
