40 S&C Instruction Sheet 1074-530
SpeedNet Client Tool
IP Routing Window,
Blacklist Tab
Figure 62. IP routing configuration window.
The
Neighbor Blacklist
feature shown in Figure 62 allows SpeedNet Client Tool to add,
delete, and retrieve a blacklisted radio by using its IP address. A SpeedNet ME Radio address
listed in the
Neighbor Blacklist
will not be considered a valid neighbor to build routes
through. The Neighbor Blacklist feature is used to prevent routing through SpeedNet ME
Radios that qualify as valid neighbors, but they are neighbors that you do not want to use
as next hop links for that particular radio address. One reason to exclude a neighbor is that
it may have a permanent or transient line-of-sight impediment that results in poor packet
delivery success over a given radio link. Further, that radio may not have a transmission
problem from a different neighbor.
The Blacklist Neighbor address table is limited to a total 36 radio addresses.
•
Add
—After entering an IP address, click on the
Add
button to add the IP address to
Neighbor Blacklist.
•
Delete
—After selecting an IP address, click the
Delete
button to delete the IP address
from the Neighbor Blacklist.
