8 S&C Instruction Sheet 1076-510
Installation
As shown in Figure 3, the SpeedNet Cell Edge Gateway
has the following LEDs:
The POWER LED, colored blue, shows the state of power
input to the SpeedNet Cell Edge Gateway. It is hardware
controlled and when off implies no power. When lit, it
indicates that the SpeedNet Cell Edge Gateway has power.
The HEARTBEAT LED, colored orange, indicates vari-
ous stages during the boot-up sequence. When the Speed-
Net Cell Edge Gateway is first powered on, the orange LED
is off for 15 seconds and then on for 10 seconds. During
boot-up/initialization, the orange LED blinks rapidly for 2
seconds (8 blinks) and stays off for 3 seconds. Once boot-up/
initialization is complete but the gateway is not yet online,
the orange LED blinks for 4 seconds (4 blinks) and stays off
for 1 second. When the gateway is online, the orange LED
blinks for 2 seconds (2 blinks) and stays off for 3 seconds.
The RESERVED LED, colored yellow, is unused and is
reserved for future use.
Reserved (Yellow)
Figure 3. SpeedNet Cell Edge Gateway LED indicators.
Heartbeat (Orange)
Power (Blue)
