8
S&C Instruction Sheet 461-500
Installation
STEP 1.
For Overhead Pole-Top Style TripSaver Dropout
Reclosers: Attach the mounting to its mounting
bracket as illustrated in Figure 3. A mounting
bracket—suitable for crossarm, pole, or wall
mounting—is furnished only if specified through
the addition of suffix “-B” or “-C” to the TripSaver
Dropout Recloser catalog number. Note the
placement of the external-tooth lockwasher
between the mounting bracket and the center insert
of the mounting. Pivot the mounting to a position
that will provide maximum ease of operation,
then securely tighten the carriage bolt nut.
For Branch Feeder Style TripSaver Dropout
Reclosers: Attach the mounting base support to the
crossarm(s) or structure. A backup member with
carriage bolts, flat washers, lockwashers, and nuts
is furnished only if specified through the addition of
suffix “-D1,” “-D2,” “-D3,” or “-D4” to the TripSaver
Dropout Recloser catalog number.
Carriage bolt
Carriage bolt nut
Lockwasher
Mounting bracket
Overhead pole-top
mounting center insert
External tooth
lockwasher
Figure 3. Attaching Overhead Pole-Top Style TripSaver Dropout
Recloser mounting to mounting bracket.
Summary of Contents for TripSaver
Page 24: ......
